|
|
|
Pioneer®
(GM-5400T) |
760 Watts Max 2-Channel Bridgeable Amplifier
|
 |
| Weight: 10.50 lbs |
|
|
|
| |
|
|
|
|
The 2-channel GM-5400T provides a selectable 50Hz bass boost and a
built-in crossover for fine-tuning your tunes. Plus, it comes with
speaker level inputs for easy connection to an OEM headunit. Selectable
50Hz Bass Boost gives you more control over how your music sounds. It
lets you set the optimal bass level for each speaker/sub connected to
the GM-5400T, so the tone controls from your headunit can do what they
do best. And because this is selectable bass boost, you can set the
level at 0dB, 6dB, or 12dB, whichever sounds best to you.
Built into the GM-5400T is a very smart crossover network. It works like
a gateway, routing the big bass signals (80Hz or lower, at
-12dB/octave) to the speaker that handles them best, filtering out
higher-frequency signals to that speaker. This optimizes your system's
efficiency and delivers the best possible sound quality. The GM-5400T's
speaker level inputs allow you to connect your OEM unit (or any unit
that doesn't have the typical RCA-type inputs) without having to buy
add-on adapters. S0, the install goes faster, you save money, and you've
got a Pioneer amp in your vehicle.
| Specifications |
 | Peak Music Power: 760 Watts |
| Number of Channels: 2 |
| Load Impedance Capability: 2~8 Ohm (Stereo), 4~8 Ohm (Bridged) |
| Continuous Power (4 ohm): 125W x 2 |
| Continuous Power (2 ohm): 190W x 2 |
| Continuous Power Bridged (4 ohm): 380W x 1 |
| Frequency Response :10Hz ~ 50kHz |
| Total Harmonic Distortion: <0.03% |
| Signal-to-Noise Ratio: >95dB |
| Dimensions: 10-1/2"x2-1/2"x 13-5/8" |
| Bridgeable |
| Channel # Capability: 2/1 |
| PWM Regulated MOSFET Power Supply |
| Balanced Isolator Input Circuit |
| RCA Inputs: 2 Channel |
| Speaker Level Input: 2 Channel |
| Input Level Control: Hi-Volt (400mV ~ 6.5v) |
| Built-in Crossover: Selectable LPF |
| Crossover Frequency Range: 80Hz, -12dB/Oct. |
| Bass Level Control: 50Hz, 0/6/9/12dB |
| Output Power (4 Ohm, <=1% THD): 125 Watts x 2 |
| Output Power (4 Ohm Bridged, <=1% THD): 380 Watts x 1 |
| Output Power (2 Ohm, <=1% THD): 190 Watts x 2 |
| Signal to Noise (1 Watt into 4 Ohms): 75 dBA |
| Dynamic Power (4 Ohm): 130 |
|
|
